for data exchange application. You can set the time it waits before exchanging any data. This is useful for some
Slaves with slower responses in communication.
Received Data Timeout
applies when the AS Series CPU
module acts as a server to send out communications. The timeout is how long the module waits before the
received data times out.
Set COM1 LED to show: when COM1 is selected from the drop-down list, it shows the RS485 communication
status of the COM1. If CARD1 is selected, it shows the CARD1 communication status.
Set COM2 LED to show: when COM2 is selected from the drop-down list, it shows the RS485 communication
status of the COM2. If CARD2 is selected, it shows the CARD2 communication status.
8.2.8 Options - Ethernet Port Basic Setting
The communication parameters can be set for the Ethernet port in the CPU module in this page. Refer to other related
documents or manuals for more information about Ethernet.
Mode
sets the addressing mode of the IP of the CPU module.
If users select
Static
, they can specify an IP address directly. If
DHCP
or
BOOTP
is selected, the IP address is assigned
dynamically by a DHCP/BOOTP server.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
