❯
Preferably insert the "Paro straight probe" into
the chuck and secure using the tool kit cover.
❯
Switch on the device
.
❯
Start the handpiece with the foot switch.
During treatment using the Paro handpiece the
nozzle ejects fluid as a pulsating stream. The
fluid hits the instrument in the top third.
Possible faults:
– If spray mist is released there is possibly air
in the hose lines.
– Nozzle blocked; replace the nozzle.
– Stream of fluid does not meet the instrument
in the top third or completely misses the
instrument; replace the nozzle.
Instrument chuck/sealing ring check
During treatment, two sealing rings prevent fluid
from entering the instrument chuck.
– Support seal in the union nut
– Sealing ring at the instrument chuck
Usage
22 9000-615-28L02 1903V004
EN
To Next Page
Loading...
Need help?
General
