CAUTION
Extremely sensitive patients may
experience reactions on their mucous
membranes.
Vector Fluid Polish contains PHB ester
as a preserving agent.
❯
In cases of known patient hypersensi-
tivity to PHB esters, treatment should
be carried out using just water or a
water-based active ingredient solution.
Vector Fluid Polish is a polishing fluid with
hydroxylapatite particles (average size < 10 µm)
for the following applications:
– Smoothing work with a polishing effect
– Thorough removal of subgingival, adherent
biofilms. The energy efficiency of the Vector
Paro is improved by the particles added to the
polish.
– Teeth cleaning
– Peri-implant mucositis and peri-implantitis
– Applications on the periodontium
Vector Fluid Polish is a ready-to-use solution,
filled in a bag. Special plastic inserts on the inside
of the fluid bag ensure complete emptying.
Store Vector Fluid Polish at room temper-
ature.
To prevent it from drying out, do not
expose it to direct sunlight.
Do not store it in a refrigerator. Cold Fluid
Polish is highly viscous and uncomfort-
able for the patient.
9.9 Cleaning components
Vector/RinsEndo Disinfection
Ready-to-use aldehyde-free solutions for fast-
acting disinfection and cleaning of the Vector
hose system. The undiluted solution is poured
into the fluid container. These steps must be car-
ried out every time a new fluid bag is inserted
and before breaks in treatment of more than
24 hours, "14 Treatment breaks for more than
24 hours".
Vector cleaner
Ready-to-use solution for the removal of acid-
soluble deposits in the hose system and in the
handpieces of the Vector system. Special cleaner
with intensive cleaning effect and very good
material compatibility.
9.10 Vector toolcard
The instruments are subject to wear which will
depend on their material,
the surfaces being treated and length of time in
use.
All instruments must be regularly checked with
the Vector toolcard in order to check the degree
of wear, "15.4 Checking instrument wear".
Usage
9000-615-28L02 1903V004 29
EN