Result:
The assembly pin is a disposable item and can
be disposed of after use.
Disinfect the assembly sleeve with standard
commercially available disinfectant, e.g. FD 322
or ID 212 forte. The assembly sleeve is not auto-
clavable.
15.10 Checking the function of the
tool kit cover
The torque wrench located in the tool kit
cover is subject to wear as a result of var-
ious factors. If the torque wrench is
defective, this means that the tools in the
handpiece can no longer be properly
secured. For this reason the function of
the torque wrench should be regularly
checked.
❯
Place the test tool (included in the service kit)
vertically in the torque wrench.
Never rotate the test tool anti-clockwise,
as otherwise it will break off.
❯
Rotate the test tool clockwise. Hold the tool kit
cover steady while doing this.
Result:
Test tool stays intact:
– Tool kit cover can still be used further.
Test tool breaks off:
– Tool kit cover can no longer be used and must
be replaced with a new one.
Usage
9000-615-28L02 1903V004 65
EN
To Next Page
Loading...
Need help?
General
