11.3 Treatment with a Scaler hand-
piece
CAUTION
Risk of injury due to burns
During operation some of the compo-
nents inside the handpiece heat up.
Contact with hot parts can cause burns.
❯
Only operate the Scaler handpiece
with the cover fitted and intact.
During treatment using the Scaler handpiece, it
can be operated using just water (LIQUID) or
using water with the addition of Vector Fluid
Polish (FLUID) as required.
During treatment using the Scaler handpiece,
fluid is applied as a constant stream.
The addition of Vector Fluid Polish
reduces pain intensity for the patient.
NOTICE
Residue of Vector Fluid Polish can
cause blockages in the device.
❯
Rinse the unit with water after every
treatment in which Vector Fluid Polish
is used (RINSE).
Usage
38 9000-615-28L02 1903V004
EN
To Next Page
Loading...
Need help?
General
