To Next Page

To Previous Page

23Service Guide: EFI Fiery Central integrated server

Replacing parts

Removing and replacing boards

This section includes procedures for removing and replacing the following boards:

• User interface board

• Motherboard

The FC integrated server is shipped from the factory with a standard board configuration. If optional components

have been installed, see the documentation that accompanies the particular option kit.

User interface board assembly

The user interface board (UIB) provides the interface between the FC integrated server and the user. The front of the

UIB contains circuitry for the following:

• Activity lights (amber, green, and red LEDs)

• Display window (LCD)

• Four line selection buttons

• Up and Down buttons

• Menu button

• Jewel lights

The UIB cable is routed from a connector on the back of the user interface board to connector J27 on the motherboard

(see Figure 12 on page 28).

Other manuals for EFI Fiery

Questions and Answers:

Need help?

Do you have a question about the EFI Fiery and is the answer not in the manual?

General