Installing Fiery Central integrated server
Software
This chapter explains how to install the FC integrated server system software. This chapter also describes how to
create a backup and restore on the FC integrated server.
Server software installation
FC integrated server is shipped with the following DVDs:
• Fiery Central System Software DVD contains the FC integrated server system software.
• Windows 10 DVD 2 contains Windows 10 operating system.
• Windows 10 DVD 3 contains Windows 10 operating system.
• Fiery Central User Software DVD contains Command WorkStation and other client software utilities, as well as
user documentation in PDF format.
Installing the system software
When installing FC integrated server software from the System Software DVD, you can also install user software. You
will be prompted to insert the required DVDs as needed.
For more information about purchasing optional FC integrated server software, contact your support representative.
To install the FC integrated server software
1 Before you install the server software, do the following:
• Connect a monitor, mouse, and keyboard to the FC integrated server. Connect the FC integrated server to a
power outlet.
• Make sure the FC integrated server is shut down.
2 On the front panel of the FC integrated server, press the power button. Insert the Fiery Central System Software
DVD into the DVD drive.
The FC integrated server automatically boots from the DVD drive. Wait while the Windows files are loaded.
3 At the Fiery System Installer screen, select the language you use for the installation process.
4 At the message, warning you that proceeding erases all data on the hard disk drive, click Continue to proceed with
the installation.
5 When prompted, insert the Windows 10 DVD 2. Wait for the files to be copied to the FC integrated server.
6 When prompted, insert the Windows 10 DVD 3. Wait for the files to be copied to the FC integrated server.
To Next Page
Loading...
Need help?
General
