Introduction
This document includes information about servicing the EFI Fiery Central integrated server. In this document, EFI
Fiery Central integrated server is referred to as “the FC integrated server.”
About the Fiery Central integrated server
FC integrated server is a server computer that runs Fiery Central software. Fiery Central software is a modular, PDF-
based production workflow tool that provides efficient load-balanced network printing to high-volume print
environments.
For more information on Fiery Central software, refer to the documentation that is included in the software kit.
Preparing for service procedures
Before installing or servicing the FC integrated server, follow general precautions and obtain the correct tools.
Precautions
• Use a soft cloth moistened with Lens and Mirror Cleaner to clean the surface of the FC integrated server display
window.
Other solvents, such as water, may damage the polarizer on the display window.
ATTENTION: Ne jamais soulever le serveur d’impression par sa partie supérieure : celle-ci ne peut pas supporter le
poids du système.
AVVERTENZA:
Il server di stampa non deve essere mai sollevato afferrandolo dal pannello superiore, in quanto
quest’ultimo non può sostenere il peso dell’intero sistema.
WARNUNG: Heben Sie den Druckserver nicht an der oberen Gehäuseabdeckung an. Die obere Gehäuseabdeckung
ist nicht dafür ausgelegt, das Gesamtgewicht des Systems zu tragen.
ADVERTENCIA: No levante nunca el servidor de impresión agarrándolo por el panel superior. El panel superior no
soporta el peso del sistema.
ADVERTÊNCIA:
Nunca erga o servidor de impressão pelo painel superior. O painel superior não suporta o peso do
sistema.
Caution:Avoid pressing the surface of the LCD.
Applying excessive pressure to the LCD window causes it to change color.
Warning: Never lift the FC integrated server by grasping the top panel. The top panel does not support the
weight of the system.
To Next Page
Loading...
Need help?
General
