FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 96
20.4.3 How to Configure the Equalizer (EQ)
The Transmit Equalizer control panel is found on the Transmit tab of the Main Menu as shown
above. When enabled, the graphic equalizer can be optimized for different microphones and
operating styles such as DX, contesting, and SSB. The sliders provide a +/- 10 dB adjustment range
over eight octaves. The settings shown above provide very good audio quality for many dynamic
microphones.
Similarly, the Receive Equalizer is found on the Audio tab of the Main Menu as shown above.
When enabled, the graphic equalizer can be optimized for different listening conditions and
operating styles. The sliders provide a +/- 10 dB adjustment range over eight octaves.
20.4.4 How to Configure VOX
The VOX controls are found in the TX Menu. Tap the VOX button to enable voice-operated transmit
operation and adjust the VOX gain slider to adjust the VOX sensitivity. The sensitivity should be
adjusted to the minimum that allows reliable keying by the voice without keying from other room
noises. VOX Delay sets the hang time before the transmitter unkeys after you stop speaking. The
delay should be set to be comfortable for the style of operation desired. See section 20.4.7, DAX
To Next Page
Loading...
Need help?
General
