FlexRadio Signature FLEX-6000 Series User Manual

FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 17
4.4 INPUT DEVICES
A microphone or key is required to operate the transmitter in your FLEX-6000 transceiver. A
straight key or paddles can be plugged into the Key port on the back panel of the Maestro. A
microphone can be plugged into one of the available microphone inputs.
The following sections describe, in detail, the connections that can be made on the back panel of
the Maestro.
4.4.1 Maestro “C” External Monitor Port
The external monitor port is provided to connect an external monitor to your Maestro device. The
Maestro screen is then "mirrored" to the external monitor providing a larger viewing field.
4.4.2 Straight Key and Paddles Connection
For CW operation, the ⅛ inch (3.5mm) TRS KEY connector accepts a TRS plug for operating a keyer
with paddles or a straight key.
When Connecting a CW straight key, a TRS plug must be used for proper connectivity to the
Maestro. Connect the key to the Tip and Sleeve, and leave the Ring unconnected.
When connecting a CW paddle and using the internal electronic keyer, connect the Dot to the Tip,
the Dash to the Ring, and the paddle common to the Sleeve.

FlexRadio Signature FLEX-6000 Series Specifications

General

Brand	FlexRadio
Model	Signature FLEX-6000 Series
Category	Transceiver
Language	English