FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 46
Contesters will find that SmartControl makes the contesting session a lot more powerful,
and a lot less stressful! SmartControl gives you easy, intuitive access to all of the main
controls that contest operators crave.
EMA/Public Service operators may find that it is easier to teach volunteer operators how to
use the Maestro/M-Series Control Surface than it is to teach them how to click through the
menus of SmartSDR.
VHF/UHF operators who wish to tune two different bands at the same time will find it easy
to set up one band on Slice A in one panadapter and another band on Slice B in a different
panadapter. Now you can have a tuning knob to control each band. And you have easy
access to control functions without grabbing the mouse.
Hams with a visitor in their shack can set up SmartControl and let your visitor/trainee
control your rig while you can monitor what they are doing and stay in control. You could
call this “Driver’s Ed mode.”
9.4 GETTING STARTED - ACTIVATING SMARTCONTROL
To activate the SmartControl you first need to be connected to your FlexRadio via SmartSDR for
Windows, The 6000 M Series, SmartSDR-IOS, or SmartSDR-Mac.
From the Maestro:
Power up your Maestro.
At the “Select Radio” screen, highlight the radio you wish to control with SmartControl.
(You may have more than one radio on the network)
Select the Connect button. This will open the “Select a Version” menu screen.
To Next Page
Loading...
Need help?
General
