FlexRadio Signature FLEX-6000 Series User Manual

FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 142
The image below illustrates an example SO2R configuration using the FLEX-6700.
32.3.2 FLEX-6300 and FLEX-6500 Full Duplex
Both the FLEX-6300 and FLEX-6500 models are enabled for full duplex operation using XVTR as a
receive-only port so long as at least 70 dB of port-to-port isolation is provided for a 100W station.
This may be provided through a combination of antenna isolation and external bandpass filtering
for cross-band operation. RX A may alternately be used on the FLEX-6500. This feature can also be
used for satellite operation with suitable transverter support.
32.4 SCU OVERLOAD FUNDAMENTALS
All radios are susceptible to overload. Overload conditions caused by a signal level that is too high
can result in compromised performance, the inability to receive, or even receiver damage. An
understanding of how overload occurs and methods to avoid it is required for the proper operation
of a radio in full duplex mode.

FlexRadio Signature FLEX-6000 Series Specifications

General

Brand	FlexRadio
Model	Signature FLEX-6000 Series
Category	Transceiver
Language	English