FlexRadio Signature FLEX-6000 Series User Manual

FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 117
 The XVTR input/output port may be used on the FLEX-6000s as another receive-only input
or may be used as a transverter transmit or common receive port. RX A and/or RX B may
be used for split transmit-receive operation when selected as the receive antenna and
XVTR as the transmit antenna.
 PIN diode silent CW QSK operation on ANT1 and ANT2 require that both receive and
transmit be on the same antenna or that a dedicated receive-only antenna be used on RX
A, RX B, or XVTR. If ANT1 and ANT2 are used separately as receive and transmit antennas,
the transmitter reverts to mechanical relay TR switching. Each Slice has a QSK annunciator
that indicates when PIN diode TR switching is engaged.

FlexRadio Signature FLEX-6000 Series Specifications

General

Brand	FlexRadio
Model	Signature FLEX-6000 Series
Category	Transceiver
Language	English