FlexRadio Signature FLEX-6000 Series User Manual

FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 44
If the data rate from the radio to Maestro is higher than can be supported by the radio’s Internet
connection use the Low BW Connect button to start the radio using panadapter settings that
minimize the Internet data transfer rate. These are temporary settings for the session that are not
retained in the radio’s persistence database.
SmartLink remains logged in after operating sessions have finished, so it is usually not necessary to
repeat the login process to start another session. However, there are circumstances when it is
desirable to log out at the end of an operating session. When a session is not in progress, start
Maestro and navigate to the Select Radio screen, tap the logged-in SmartLink user icon in the lower
right corner of the screen, then tap Logout in the Account Settings screen. If a session is in
progress, use the Switch Radio button on the Radio tab of the Main Menu to end the session and
return to the Select Radio screen, tap the logged-in SmartLink user icon in the lower right corner of
the screen, then tap Logout in the Account Settings screen.

FlexRadio Signature FLEX-6000 Series Specifications

General

Brand	FlexRadio
Model	Signature FLEX-6000 Series
Category	Transceiver
Language	English