Connectivity & Network Setup
119
Tools
5
Proxy Server Setup
Select the proxy server specification from [Same Proxy for All Protocols] and [Different Proxy
for Each Protocol].
Addresses to Bypass Proxy Server
Enter addresses not using the proxy server. You can use wildcards “∗” for specifying the
addresses.
HTTP Proxy Server Name
Enter the HTTP server name. Up to 255 characters are allowed.
HTTP Proxy Server Port Number
Set the HTTP server port number in the range from 1 to 65535.
The default value is 8080.
Important • Do not use the numbers assigned to the other ports.
HTTP Proxy Server Authentication
Select whether to enable the authentication feature of the HTTP server.
HTTP Proxy Server Login Name
Enter a login name of the HTTP server. Up to 31 characters are allowed.
HTTP Proxy Server Password
Enter a password of the HTTP server. Up to 31 characters are allowed.
HTTPS Proxy Server Name
Enter the HTTPS server name. Up to 255 characters are allowed.
HTTPS Proxy Server Port Number
Set the HTTPS server port number in the range from 1 to 65535.
The default value is 8080.
Important • Do not use the numbers assigned to the other ports.
HTTPS Proxy Server Authentication
Select whether to enable the authentication feature of the HTTPS server.
HTTPS Proxy Server Login Name
Enter a login name of the HTTPS server. Up to 31 characters are allowed.
HTTPS Proxy Server Password
Enter a password of the HTTPS server. Up to 31 characters are allowed.
Outgoing/Incoming E-mail Settings
Set e-mail transmission and reception.
POP3 Server Settings
Set the POP3 server. In [POP3 Server Settings], you can set the following items.
POP3 Server Name/IP Address
Enter a server name or IP address. Up to 128 characters are allowed.
To Next Page
Loading...
Need help?
General
