Stapler Faults
421
Problem Solving
14
6
Push the staple cartridge into the
machine until it clicks into place.
7
Close the front cover of the finisher.
Note • If the front cover is not
completely closed, a message
will appear and the machine
will not operate.
If you cannot remove jammed staples even after you use the above procedure, contact
our Customer Support Center.
Staple Jams in the Staple Cartridge (For Finisher-B1)
The following describes how to clear staple jams in the Finisher-B1 (optional).
1
Make sure that the machine has
stopped, and open the front cover
of the finisher.
2
Grip the lever as shown in the
figure to pull out the staple
cartridge to the right, towards you.
3
Move up the staple cartridge, and
take it out of the machine.
To Next Page
Loading...
Need help?
General
