HP-GL2 Emulation
457
Appendix
15
HP-GL2 Emulation
This section explains how to operate the HP-GL mode menu and the settings that can
be made with it.
HP-GL Settings List
Items that can be set using the HP-GL mode menu are explained in two groups: basic
settings and advanced settings.
Basic Settings
Document Size 101 [99] (Default) : Auto
[100]: Paper
[0] : A0
[1] : A1
[2] : A2
[3] : A3
[4] : A4
[5] : A5
[10] : B0
[11] : B1
[12] : B2
[13] : B3
[14] : B4
[15] : B5
Sets the document size created by a PC client. When Auto ([99]) is
specified, the document size is determined based on the Scaling Mode
setting (the item number 160).
Paper Size 102 [99] : Auto
[101] (Default) : A Size
[3] : A3
[4] : A4
[5] : A5
[14] : B4
[15] : B5
Sets the paper size to be printed. This can be set if the paper tray setting
is either “Auto” or “Tray 5 (Manual Feed)”. In addition, settings can only
be made for cut paper. When Auto (99) is specified, the paper size is
determined based on the Scaling Mode setting (the item number 160).
Paper Tray 103 [0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Manual Feed
Sets the paper tray to be used for printing.
Coordinate
Rotation
104 [0] (Default) : 0 degree
[1] : 90 degree
Sets the paper orientation for printing.
To Next Page
Loading...
Need help?
General
