Fuji Xerox DocuCentre-III 2007 User Manual

Scan Service Settings
137
Tools
5
Edge Erase - Top & Bottom Edges
Set the default value for the amount of edges erased from the original in the top and bottom
directions in [Edge Erase] in the [Layout Adjustment] screen. Specify a value from 0 to 50 mm
in 1 mm increments.
Edge Erase - Left & Right Edges
Set the default value for the amount of edges erased from the original in the left and right
directions in [Edge Erase] in the [Layout Adjustment] screen. Specify a value from 0 to 50 mm
in 1mm increments.
Center Erase/Binding Edge Erase
Set the default value for the binding erase amount of the original in [Edge Erase] in the
[Layout Adjustment] screen. Specify a value from 0 to 50 mm in 1 mm increments.
Quality/File Size
Set the image quality and the file size.
Set [Quality: Normal/File Size: Small], [Quality: Higher +1/File Size: Larger +1], [Quality:
Higher +2/File Size: Larger +2], [Quality: Higher +3/File Size: Larger +3], or [Quality:
Maximum/File Size: Largest].
E-mail Subject
Set the default value for the e-mail subject. Up to 128 characters can be entered for the
subject.
Searchable Text
Set whether or not to use the OCR feature to generate searchable text.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Language To Identify
Set the language to identify the text on the original document.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Searchable - Text Compression
Set whether or not to compress searchable text.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Scan to PC Defaults
You can select the default protocol (transfer protocol) used for transfer from FTP, SMB,
and SMB (UNC Format).
Original Size Defaults
Set the original size shown in [Original Size] in the [Layout Adjustment] screen. An
original size is assigned to each of the 11 buttons other than [Auto Detect].
When frequently scanning non-standard size originals, by presetting the non-standard
size, you can save time to enter the original size each time a document is scanned.

Fuji Xerox DocuCentre-III 2007 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-III 2007
Category	All in One Printer
Language	English