5 Tools
184
Tools
5
Security Settings
Set the security settings.
SSL/TLS Settings
Configure the SSL/TLS settings.
îš„Device Certificate - Server
Select a certificate for HTTP SSL/TLS communications.
îš„HTTP - SSL/TLS Communication
Select whether or not to enable HTTP SSL/TLS communications.
îš„HTTP - SSL/TLS Port Number
Set the port number used for HTTP SSL/TLS communication from 1 to 65535.
The default value is 443.
Important • Do not use the numbers assigned to the other ports.
îš„LDAP - SSL/TLS Communication
Set whether or not to enable the SSL/TLS communications for authentication and searches.
If you enable the LDAP SSL/TLS communications, you must set [Primary Server Port
Number] and [Secondary Server Port Number] under [LDAP Server/Directory Service
Settings].
The port number for SSL/TLS communications of the LDAP directory server is normally set to
636.
îš„SMTP-SSL/TLS Communication
Configure the SSL/TLS communications.
z
Disabled
The machine does not communicate in SSL/TLS.
z
STARTTLS (If Available)
The machine verifies the certificate and communicates in SSL/TLS. If the verification fails, the
machine does not communicate in SSL/TLS.
z
STARTTLS
The machine verifies the certificate and communicates in SSL/TLS. If the verification fails, the
machine cannot perform communication.
z
SSL/TLS
The machine communicates in SSL/TLS.
Note • The Internet Fax Direct (P2P) feature does not support SMTP-SSL/TLS communication.
îš„ThinPrint-SSL/TLS Communication (ApeosPort Series Models Only)
Select whether or not enable the SSL/TLS communications.
îš„Device Certificate - Client
Select a certificate for HTTP SSL/TLS communications.
îš„Verify Remote Server Certificate (ApeosPort Series Models Only)
When the machine is operated as an SSL client, select whether or not to verify the certificate
of the remote server.
S/MIME Settings (ApeosPort Series Models Only)
Configure S/MIME settings.
îš„Device Certificate - S/MIME
Select a certificate for S/MIME communications.
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.351).
îš„S/MIME Communication
Select whether or not to enable S/MIME communications.
To Next Page
Loading...
Need help?
General
