To Next Page

To Previous Page

5 Tools

194

Tools

Allow Print Driver to Override

Select the check box to print a banner sheet according to the banner sheet print settings of

the print driver.

Banner Sheet Offset

Set whether or not to offset when banner sheets are output.

Banner Sheet Tray

Select a paper tray used for banner sheets.

This setting applies to Trays 1, 2 and 3, 4, 6 (optional). You cannot apply setting to Tray 5.

PostScript Paper Supply

Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or disabled

when the paper tray is selected. Select [Auto Select] to enable the DMS feature, or [Select

Paper Tray] to disable the feature.

When PostScript data generated by other than the print driver is printed, the tray is not

selected as intended depending on the description method of the PostScript data. In this

case, select [Select Paper Tray].

Note • Even when you select [Auto Select], the setting is automatically changed to [Select Paper

Tray] when [Use Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print

PostScript data.

• This feature does not appear for some models. An optional component is required. For more

information, contact our Customer Support Center.

PostScript Font Absence

Set an action to take when a PostScript font specified in a job is not present.

Note • This feature does not appear for some models. An optional component is required. For more

information, contact our Customer Support Center.

Cancel Printing

Cancels printing.

Substitute Font and Print

Prints using a substitute font. Courier is used as the substitute font.

PostScript Font Substitution

Set whether or not to use ATCx as a substitute if a PostScript font specified in a job is not

present.

Note • This feature does not appear for some models. An optional component is required. For more

Fuji Xerox DocuCentre-IV 4070 User Manual

Questions and Answers: