Fuji Xerox DocuCentre-IV 4070 User Manual

2 Paper and Other Media
40
Paper and Other Media
2
Important • Printing on paper that differs from the paper type and size selected in the print driver, or
printing from a tray that does not support the loaded paper may result in a paper jam. To
ensure correct printing, select the correct paper size, paper type, and paper tray.
Note • Basis weight is the weight of 1 m
2
of a paper sheet.
• Ream weight is the weight of 1,000 sheets of duodecimo size (788 x 1,091 mm) paper.
• When copying on non-standard size paper from Tray 5 (Bypass), you must enter the paper
size. Furthermore, if you frequently copy on non-standard size paper, you can preset the
size on the machine. That size then appears under [Standard Sizes] on the [Tray 5] screen.
For more information on the settings, refer to "Tray 5 - Paper Size Defaults" (P.133).
Supported Paper Type
Standard Paper
When printing or copying on commonly used paper (plain paper), use paper meeting
the standards described below. To copy or print as clear as possible, we recommend
the following standard paper.
*1:Select the paper type setting for the paper loaded on a tray. For more information, refer to "Changing
the Paper Settings" (P.55).
Semi Standard Paper
In addition to the standard paper, the following paper also can be used.
Paper Name
Basis
Weight
(gsm)
Paper Type
*1
Notes / Countermeasure
P64Plain-
V-Paper 64 Plain -
Paper Name
Basis
Weight
(gsm)
Paper Type
*1
Notes / Countermeasure
Laserprint 70 Plain -
Laserprint 75 Plain -
Laserprint 80 Plain -
Performer 70 Plain -
Performer 75 Plain -
Performer 80 Plain -
Performer + 70 Plain -
Performer + 75 Plain -
Performer + 80 Plain -
Business 80 Plain -
Business + 70 Plain -
Business + 75 Plain -
Business + 80 Plain -
Express 70 Plain -
Express 75 Plain -

Fuji Xerox DocuCentre-IV 4070 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 4070
Category	Copier
Language	English