5 Tools
192
Tools
5
Other Settings
You can configure other settings related to the paper used in the printer.
Print Area
Set whether or not to expand the print area.
For more information about the printable area, refer to "Printable Area" (P.569).
For more information on the extended printable area, refer to "Extended Printable Area" (P.569).
Substitute Tray
When there is no tray containing the paper size selected by the Auto Paper selection, select
whether or not to print with paper loaded in another paper tray. In the event of using a
substitute tray, select the paper size from [Use Larger Size], [Use Closest Size], or [Select
Tray 5].
Note • When documents are printed using emulation such as ESC/P-K and HP-GL/2, the substitute
tray setting is not valid and a message prompting you to load paper displayed on the screen.
îš„Display Message
Does not use a substitute tray, but displays a paper loading message.
îš„Use Larger Size
Switches to the next larger size of paper than previously selected and prints at the same
magnification.
îš„Use Closest Size
Switches to the closest size of paper to previously selected and prints. If necessary, the
image is automatically reduced in size on the paper.
Note • If there is a client specification, the client specification is prioritized.
îš„Select Tray 5
Prints using the paper loaded in Tray 5.
Paper Type Mismatch
Set an action to take when the paper type loaded in the paper tray does not match the paper
type specified when a print job is submitted.
îš„Print
Prints using the paper loaded in the tray.
îš„Display Confirmation Screen
A confirmation screen appears to ask whether or not to print the job.
If a paper type mismatch occurs during printing, the machine ignores the paper type specified
and prints the job in accordance with [Paper Tray Priority], [Paper Size], or [Substitute Tray].
For more information, refer to "Automatic Tray Selection" (P.45).
îš„Display Paper Supply Screen
Load another type of paper in the selected tray by following the message displayed on the
touch screen, and then select the [Start] button. The machine changes the paper type setting
for the tray and prints the job.
Note • The machine keeps the changed paper type setting after the printing.
• Even if you select the [Start] button without loading another type of paper in the selected
tray, the machine considers the paper type has been changed and prints the job.
Consequently, the print quality cannot be guaranteed because the paper type loaded in the
paper tray does not match the paper type specified.
To Next Page
Loading...
Need help?
General
