Fuji Xerox DocuCentre-IV 4070 User Manual

3 Maintenance
78
Maintenance
3
Cleaning the Constant Velocity Transport Glass and Document Presser
If the constant velocity transport glass or document presser become soiled, smudges
may appear on copies, faxes, or scanned documents and the machine may not
properly detect document sizes.
To ensure clean copies at all times, clean the constant velocity transport glass and
document presser about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, faxing, or scanning.
1 Wipe the document presser with a soft cloth
moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
Important • Do not press the film of the document
presser with an excessive force as it can
be easily damaged.
• Do not use cleaning agents other than
water or neutral detergent.
Note • If dirt does not come off easily, gently
wipe it with a soft cloth moistened with a
small amount of neutral detergent.
2 Wipe the constant velocity transport glass
with a soft cloth moistened with water to
remove any dirt, and then wipe it with a soft
dry cloth.
Important • Do not use cleaning agents other than
water or neutral detergent.
Note • If dirt does not come off easily, gently
wipe it with a soft cloth moistened with a
small amount of neutral detergent.
Cleaning the Document Feeder Rollers
If the document feeder rollers become soiled, smudges may appear on copies, faxes,
or scanned documents and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, faxing, scanning, or printing.
1 Lift the latch of the document feeder top
cover until it is completely open.
Note • When you fully open the cover, it enters a
fixed position. Open the cover gently.
Document
presser
Constant velocity
transport glass

Fuji Xerox DocuCentre-IV 4070 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 4070
Category	Copier
Language	English