16 Appendix
572
Appendix
16
Optional Components
The following table shows the optional components available. To purchase these
options, contact our Customer Support Center.
Product Name Description
Extension System Memory
(1 GB)
Increases the system memory.
Note • Commercially available memory cannot be used for the
machine. Be sure to use the optional extension memory
we provide, or we cannot guarantee proper operation of
the machine if a problem occurs. Our service
representative installs the optional component.
HDD Extension Kit *
1
Provides the extended copy features and adds the spool and
scan features.
Exit 2 Tray *
1
Allows you to use the center output tray as two separate trays.
Note • It cannot be installed when any finisher is installed.
Side Tray Delivers output face up.
Two Tray Module Consists of two trays.
Tandem Tray Module Consists of two trays. Tray 3 can load 870 sheets of paper and
Tray 4 can load 1,130 sheets of paper (when using 80 gsm
paper).
Stand Removable stand on which the machine (main unit, Tray 1,
and Tray 2) is installed. Replaceable with Two Tray Module or
Tandem Tray Module.
HCF Kit Allows you to load 2,000 sheets of papers (when using 80 gsm
paper) in tray.
Finisher-A1 *
3
Staples output sheets.
Finisher-B1 *
3
Staples output sheets.
2/4 Hole Punch Kit for
Finisher-B1 *
3
2/4 hole-punches output sheets.
US 2/3 Hole Punch Kit for
Finisher-B1 *
3
2/3 hole-punches output sheets.
Booklet Maker Unit for
Finisher-B *
3
Staples output sheets. Also folds output sheets in half or
staples them.
Finisher-C1 Staples and hole-punches output sheets.
Finisher-C1 with Booklet
Maker
Staples or hole-punches output sheets. Also folds output
sheets in half or staples them.
US 2/3 Hole Punch Kit for
Finisher-C1
2/3 hole-punches output sheets.
Note • This kit is available only when the Finisher-C1 or
Finisher-C1 with Booklet Maker is installed.
Stamp Kit Allows you to stamp on a document scanned with the
document feeder when sending a fax.
Power Cord A tool to connect the machine to a power source.
Accessory Table A A kit to load related products.
Printer Kit *
1
Adds the Print feature to the machine.