Fuji Xerox DocuCentre-IV 4070 User Manual

Printable Area
569
Appendix
16
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The standard printable area is the area of a sheet of paper excluding the 4.0 mm
margins on all four edges of paper. The actual printable area, however, may vary
depending on the printer (plotter) control language.
Extended Printable Area
When you select the extended printable area setting for printing, you can expand the
width and length of the printable area and the print assured area to 297.0 x 432.0 mm.
For copying, the printable area and the print assured area can be extended up to 297.0
x 420.0 mm.
Note • To extend the printable area, change the PCL print driver setting, or the [Print Area] setting
on the touch screen.
For more information on the setting method on the print driver, refer to the help provided for the print
driver. For more information on the setting on the control panel, refer to "Print Area" (P.192).
When the paper width is
12 inches (A3)
Printer/Copy
4mm
4mm4mm
4mm
Unprintable area
Printable area/
Guaranteed
print area
Paper feed
direction

Fuji Xerox DocuCentre-IV 4070 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 4070
Category	Copier
Language	English