16 Appendix
656
Appendix
16
îš„When [Sample Printout] is not available in [Custom Paper Settings]
When you select a tray for [Sample Printout] and if the paper type for the tray is not set
to Coated paper, Uncoated paper, Transparency, or Custom paper under [Paper Type
& Paper Weight] > [Paper Tray Attributes], a sample printout cannot be output. In this
case, an error message appears on the touch screen.
The paper types that can be registered as Custom paper include only Coated paper,
Uncoated paper, and Transparency. Thus, [Sample Printout] in [Custom Paper
Settings] is only available when Coated paper, Uncoated paper, Transparency, or
Custom paper is set for the specified tray.
Notes and Restrictions for USB Cable Distribution
This section describes notes and restrictions for USB cable distribution when using
Tray 6 (HCF) (optional).
z
When you connect any device via a USB
cable, ensure that the USB cable is not
distributed over the motor bracket in the
rear of the Tray 6.
z
Distributing a USB cable over the motor
bracket may cause the device to
malfunction.
USB Cable
To Next Page
Loading...
Need help?
General
