To Next Page

To Previous Page

2 Paper and Other Media

Paper and Other Media

1 Pull out the tray until it stops.

Important • While the machine is processing a job, do

not pull out the tray that the job uses.

• Do not add a new stack of paper on top of

the remaining paper in the tray to prevent

paper jams or any other troubles. First,

remove the remaining paper from the

tray, and then load the new stack of

paper.

2 Load and align the edges of the paper

against the left edge of the tray, with the side

to be copied or printed on facing up.

Important • Do not load paper above the maximum fill

line. It might cause paper jams or

machine malfunctions.

• Do not place any paper or objects in the

empty space on the right side of Trays 1

to 4. It may cause paper jams or machine

malfunction.

3 Push the tray in gently until it stops.

Important • When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it

might cause machine malfunctions.

Loading Paper in Tray 3 (Tandem Tray Module) (Optional)

The following describes the procedure for loading paper in Tray 3 (Tandem Tray

Module).

When the machine runs out of paper during copying or printing, a message is displayed

on the touch screen. Add paper according to the displayed instructions. Copying or

printing automatically resumes when paper is added.

Note • Fan the paper well before loading paper in a tray. It prevents paper from sticking to each

other and reduces paper jams.

For information on changing the paper size and orientation, refer to "Changing the Paper Size for Tray 3

(Tandem Tray Module) (Optional)" (P.51).