Printing Basics
196
Using the Printer Setting Utility to Change the Printer Settings
You can select menu items and corresponding values from the Printer Setting Utility.
The following procedure uses Windows 7 as an example.
NOTE:
• Factory defaults may vary for different regions.
These settings are active until new ones are selected or the factory defaults are restored.
To select a new value as a setting:
1
Click start
→
All Programs
→
Fuji Xerox
→
Fuji Xerox Printer Software for Asia-Pacific
→
your printer
→
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in
Printer Name
.
The Printer Setting Utility appears.
2
Click the Printer Maintenance tab.
3
Select the desired menu item.
Each menu item has a list of values for the menu item. A value can be:
• A phrase or word to describe a setting
• A numerical value that can be changed
• An On or Off setting
4
Select the desired value, and then click the Apply New Settings or Restart printer to apply
new settings button.
Driver settings may have precedence over changes previously made and may require you to
change the Printer Setting Utility defaults.
Adjusting the Language
To display a different language on the operator panel:
• The Operator Panel
1
Press the System button.
2
Select Panel Language, and then press the button.
3
Select the desired language, and then press the button.
To Next Page
Loading...
Need help?
General
