Fuji Xerox DocuPrint M215 fw User Manual

Copying 218
 Lighten/Darken
You can adjust the copy density level to make the copy lighter or darker than the original.
1 For the DocuPrint M215 fw, load the document(s) face up with top edge in first into the ADF or
place a single document face down on the document glass, and close the document cover.
For the DocuPrint M215 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M215 fw Only)" on page 208
• "Making Copies From the Document Glass" on page 206
2 Press the Copy button.
3 Select Lighten/Darken, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 209
6 Press the (Start) button to begin copying.
Lighten2 Makes the copy lighter than the original. Works well with dark print.
Lighten1
Normal*
Works well with standard type or printed documents.
Darken1 Makes the copy darker than the original. Works well with light print or
faint pencil markings.
Darken2

Fuji Xerox DocuPrint M215 fw Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M215 fw
Category	All in One Printer
Language	English