Printer Management Software
60
Creating an Administrative Password
1
Launch your web browser.
2
Enter the IP address of the printer in the address bar, and then press the Enter key.
3
Click the Properties tab.
4
In the left navigation panel, scroll down to Security and select Administrator Settings.
5
Select Enabled for Administrator Mode.
6
In the Administrator Login ID field, enter a name for the administrator.
NOTE:
• The default ID and password are “11111” and “x-admin” respectively.
7
In the Administrator Password and Re-enter Password fields, enter a password for the
administrator.
8
In the Maximum Login Attempts field, enter the number of login attempts allowed.
9
Click Apply.
Your new password has been set and anyone with the administrator name and password can log
in and change the printer configuration and settings.
To Next Page
Loading...
Need help?
General
