Fuji Xerox DocuPrint M215 fw User Manual

Using the Operator Panel Menus and Keypad 356
• Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
• Initialize NVM
Purpose:
To initialize NVM for system parameters, Address Book data for fax, or Address Book data for e-mail.
After executing this function and rebooting the printer, the menu parameters or data, except the
parameters for the network, are reset to their factory default values. (Address Book is available only
on the DocuPrint M215 fw.)
See also:
• "Resetting to Factory Defaults" on page 378
Values:
DocuPrint M215 fw:
DocuPrint M215 b:
Black Yes Cleans the toner in the toner cartridge.
No* Does not clean the toner in the toner cartridge.
User Fax Section Yes Initializes the fax number entries in the Address Book.
No * Does not initialize the fax number entries in the Address Book.
User Scan
Section
Yes Initializes the e-mail and server address entries in the Address
Book.
No * Does not initialize the e-mail and server address entries in the
Address Book.
System Section Yes Initializes the system parameters.
No * Does not initialize the system parameters.
System Section Yes Initializes the system parameters.
No * Does not initialize the system parameters.

Fuji Xerox DocuPrint M215 fw Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M215 fw
Category	All in One Printer
Language	English