205
Copying
Preparing a Document
You can use the document glass or the Automatic Document Feeder (ADF) to load an original
document for copying, scanning and sending a fax. (The ADF and fax feature are available only on the
DocuPrint M215 fw.) You can load up to 15 sheets of 64 gsm documents for one job using the ADF or
one sheet at a time using the document glass.
IMPORTANT:
• Avoid loading documents that are smaller than 148.0
×
210.0 mm (5.83
×
8.27 inch) or larger than 215.9
×
355.6 mm (8.5
×
14 inch), different sizes or weights together, booklets, pamphlets, transparencies, or
documents having other unusual characteristics in ADF.
• Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or creased paper,
curled or rolled paper or torn paper cannot be used in ADF.
• Do not use the documents with staples, paper clips or exposed to adhesives or solvent based materials such
as glue, ink and correcting fluid in ADF.
NOTE:
• To get the best scan quality, especially for color or gray scale images, use the document glass instead of the
ADF.
To Next Page
Loading...
Need help?
General
