Troubleshooting
408
Mottle
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
Problem Action
The printed result has mottled
appearance.
Adjust the transfer bias.
1
Launch the Printer Setting Utility, click
Adjust BTR
on the
Printer
Maintenance
tab.
2
Adjust the setting for the type of print media being used.
3
Click the
Apply New Settings
button.
If you use non-recommended print media, use the print media
recommended for the printer.
To Next Page
Loading...
Need help?
General
