Basic Operation
54
Power Saver Mode
The printer has a power saving feature which reduces power consumption during periods of inactivity.
This feature operates in two modes: Low Power mode and Sleep mode. As delivered, the printer
switches to the Low Power mode one minute after the last job is finished. The printer then switches to
the Sleep mode after another 10 minutes of inactivity. The Sleep mode is also manually activated by
pressing the (Energy Saver) button when the display shows Select Function. When the
printer is in the Low Power mode, the LCD backlight turns off. In the Sleep mode, the (Energy
Saver) button lights up. The LCD panel goes blank and displays nothing.
The factory default settings of 1 minute (Low Power mode) and 10 minutes (Sleep mode) are
changeable within the range of 1 to 30 minutes (Low Power mode) and 6 to 11 minutes (Sleep mode).
The printer returns to the ready-to-print state in about 25 seconds when re-activated.
See also:
• "Setting the Time for the Power Saver Mode" on page 377
To Next Page
Loading...
Need help?
General
