FUTABA 7PX User Manual

Home screen
Menu screen
Menu-2
Menu-1
mixing
125
Function
Tilt Mixing
Tilt Mixing
Tilt mixing uses an outboard engine and applies bidirectional mixing from rudder to steady
to ap and from ap to rudder so that with a boat, rudder operation and tilt mixing opera
-
tion can be performed 2 servos.
Tilt mixing can be performed by rudder operation, by steering wheel and ap channel.
Steering end point function, curve function, speed function, or D/R function setup also
effects ap channel operation. However, even if set, steering reverse function setup does
not reverse the ap channel.
Effect of the set value of other functions on tilt mixing
The mixing function is assigned to auxiliary channels used by other mixing cannot be
used. When the number of channels is insufcient, cancel the other mixing.
(Preparation)
- Use the "Trim/dial select" function to select the flap channel
operation dial. (page 662)
1
(Function ON/OFF)
Tap [1/2] at the upper right of the screen to
display page 2.
Tap "Mixing" (ON) or (OFF) to select ON /
OFF.
"OFF" :Mixing function OFF
"ON" :Mixing function ON
Program composite adjustment
Setting
- Tap (ON) / (OFF).
1M23N32602_7PX_E.indb 125 2017/08/02 14:17:33

FUTABA 7PX Specifications

General

Channels	7
Frequency	2.4GHz
Telemetry	Yes
Data Logging	Yes
Model Memory	40 models
Compatibility	T-FHSS, S-FHSS
System	T-FHSS
Display	4.3 inch color TFT LCD touch screen