158
Function
Telemetry
Telemetry :The Drive Battery Electric Current
When the SBS-01C (electric current sensor) sold separately is mounted on the vehicle, the
electric current, voltage and consumption capacity of the power battery, etc., can be dis-
played.
* A drive battery electric current sensor must
be installed in the model car. Install and
connect the sensor in accordance with the
sensor instruction manual.
Telemetry
Current drive battery electric
current
Reset consumption capacity
The Speech function (ON/OFF)
The minimum and maximum
when powering ON are shown.
Alarm and vibrator ON/OFF and
type setting (The
arrow indicates
that an alarm is generated when
the electric current drops below
the set value and the arrow indi-
cates that an alarm is generated
when the electric current exceeds
the set value.)
Current drive battery voltage
Reset consumption capacity
The Speech function (ON/OFF)
The minimum and maximum
when powering ON are shown.
Alarm and vibrator ON/OFF and
type setting (The
arrow indicates
that an alarm is generated when
the battery voltage drops below
the set value and the arrow indi-
cates that an alarm is generated
when the battery voltage exceeds
the set value.)
Reset consumption capacity
The Speech function (ON/OFF)
The minimum and maximum
when powering ON are shown.
Alarm and vibrator ON/OFF and
type setting (The
arrow indicates
that an alarm is generated when
the battery capacity drops below
the set value and the arrow
indicates that an alarm is gener-
ated when the battery capacity
exceeds the set value.)
-Upper side:
Current current / voltage /
consumption capacity dis-
play.
-Lower:
This is a display of the
minimum value / maximum
value of the measured cur-
rent / voltage / consumption
capacity after turning on the
transmitter power.
* Tap the min / max display
button to restart the mea-
surement.
To Next Page
Loading...
Need help?
General
