Ultrafilter - How to change
Note
• Make sure that the ultrafilterischangedinanasepticway.
Note
Procedure
1. Release the lower part of the ultrafilter holder by pulling t he handle
and pressing the latch downwards.
2. Remove the ultrafilter by pulling it gently downwards.
3. Insert the new ultrafilter into the holder and push it gently upwards.
4. Close the holder by pushing the lower latch into position.
5. Confirm the change of ultrafilter (see Ultrafilter replacement
reminder on page 8:39).
6. Label the ultrafi lter with date for change.
7. Perform a Heat disinfection program before the AK 96 dialysis
machine is used for treatment after the ultrafilter has been changed.
Ultrafilter replacement reminder
If UFD (Ultrafilter Dialysis Fluid) is inst
alled the operator will
be reminded to change ultrafilter. The operator will be notified
by an attention alarm when a limit has been exceeded. There are
three different limits: number of
days since last change, number
of heat disinfections since last change and number of hypochlorite
disinfections since last change.
HCEN12239 Revision 12.2010
Program version 3.xx
AK 96
®
Operator's Manual - Hygiene and Maintenance
8:39
To Next Page
Loading...
Need help?
General
