13. Arm for Dialyzer Holder
The dialyzer holder arm can be turned to two positions;
pointing towards left or straight forward. The latter is
recommended w hen the machine is to be moved around,
especially when the dialyzer holder has been attached.
Turn the dialyzer holder arm by pushing it backwards
or forwards, until it clicks into position as shown in the
corresponding figure.
Attach the Dialyzer H older to the holder arm and lock
it into position using the locking screw (marked
in the
corresponding figure) on the holder arm.
14. Expansion Chamber Holder
The holder is principally used for the expansion chamber
included on the venous blood line whe
nperformingsingle
needle treatment. See "Preparations" on page 5:3 in part 1
for instructions.
2:12
AK 96
®
Operator's Manual - Machine Description
HCEN12239 Revision 12.2010
Program version 3.xx
To Next Page
Loading...
Need help?
General
