BPM button
Press the BPM button to reach the BPM main menu. On this menu
blood pressure measuring can be activated. For instructions see c hapter
11 in part 2.
Fluid Bypass button
The Fluid Bypass button is used to manually bypass the dialysis fluid
from the dialyzer.
UF Start/Stop button
The UF Start/Stop button is used to start and stop the ultrafiltration.
Fluid Path button
Press the Fluid Path button to reach the Fluid Path main menu. In
this menu parameter settings and functions related to dialysis fluid
can be set/activated.
The following will be shown on the Information Display:
UF; calculated ultrafiltration rate and profiling type
CONC; selected concentrate
TEMP; current dialysis fluid temperature
COND; current conductivity value
DIA FLUID FLOW; current dialysis fluid flow rate
DIASCAN; function activated or not activated
TMP; current transmembrane pressure
HCEN12239 Revision 12.2010
Program version 3.xx
AK 96
®
Operator's Manual - Operating the Machine
3:15
To Next Page
Loading...
Need help?
General
