10. Attachment for Service Table
These attachments, along with the 2 corresponding
attachments on the opposite side of the machine, are to be
used by the authorized technician when machine service is
carried out.
11. Mains Connection
This connection is used for the mains cable which should
always be connected, even when the machine is not in use
in order for the batteries to be charged. Check that the cable
locking spring, used to prevent the cable from loosening,
is properly fixed.
12. Fuses
When necessary, these fuses are to be changed by an
authorized technician.
2:34
AK 96
®
Operator's Manual - Machine Description
HCEN12239 Revision 12.2010
Program version 3.xx
To Next Page
Need help?
General
