EasyManuals Logo

Garmin G950 User Manual

Garmin G950
510 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
190-00870-02 Rev. A
Garmin G950 Pilot’s Guide for the Pilatus PC-6
47
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
1.7 DISPLAY BACKLIGHTING
Backlighting of the PFD and MFD, and Audio Panel keys can be adjusted automatically or manually. The
automatic setting (default) uses photocells to adjust for ambient lighting conditions. Photocell calibration curves
are pre-configured to optimize display appearance through a broad range of cockpit lighting conditions. In
normal display mode, backlighting can only be adjusted from the PFD. In Reversionary Mode, it can be adjusted
from the remaining display(s).
Adjusting display backlighting manually:
1) Press the PFD MENU Key to display the PFD Setup Menu. AUTO’ is now highlighted next to ‘PFD DSPL’. No
other window can be displayed on the PFD while the PFD Setup Menu is displayed. Pressing the MENU Key
while any other PFD window is displayed does not display the PFD Setup Menu.
2) Turn the
small FMS
Knob to select ‘MANUAL’ and press the
ENT
Key. The intensity value is now highlighted.
3) Use the FMS Knob to enter the desired backlighting then press the
ENT
Key.
4) Turn the
large FMS
Knob to highlight AUTO’ next to ‘MFD DSPL’ and repeat steps 2-4.
5) To remove the menu, press the
CLR
or
MENU
Key.
Adjusting key backlighting manually:
1) Press the PFD
MENU
Key to display the PFD Setup Menu. AUTO’ is now highlighted next to ‘PFD DSPL’.
2) Turn the
large FMS
Knob to highlight ‘PFD DSPL’.
3) Turn the
small FMS
Knob in the direction of the green arrowhead to display ‘PFD KEY’.
4) Turn the
large FMS
Knob to highlight AUTO’.
5) Turn the
small FMS
Knob to select ‘MANUAL’ and press the
ENT
Key. The intensity value is now highlighted.
6) Use the FMS Knob to enter the desired backlighting and press the
ENT
Key.
7) Turn the
large FMS
Knob to highlight ‘MFD DSPL’.
8) Turn the
small FMS
Knob in the direction of the green arrowhead to display ‘MFD KEY’ and repeat steps 4-7.
9) To remove the menu, press the
CLR
or
MENU
Key.
Figure 1-33 PFD Setup Menu
PFD

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin G950 and is the answer not in the manual?

Garmin G950 Specifications

General IconGeneral
BrandGarmin
ModelG950
CategoryGPS
LanguageEnglish

Related product manuals