Monitor setup
5-11
Modifying split screen
You can split Normal Screen so that one part continuously displays trend data.
To select a split screen view:
1. Press the
Monitor Setup key.
2. Select Screen Setup.
3. Select Split Screen and choose from the options: Trend or None.
Figure 5-3 Split screen view
Modifying the minitrend length
You can choose to view minitrend data from the last 5-minute or 30-minute period next to the
parameter’s waveform field. The 5-minute minitrend is updated every 10 seconds, and the 30-
minute minitrend once every minute.
To modify the minitrend length:
1. Press the
Monitor Setup key.
2. Select Screen Setup.
3. Select Minitrend Length and choose 5 min or 30 min.
To Next Page
Loading...
Need help?
General
