B30 Patient Monitor
7-2
Adding demographics
1. Admit/Discharge key.
2. Select Admit Patient - Demographics.
3. Enter patient data: Height is adjustable from 15 to 250 cm (5 in to 8 ft 2 in), Weight is
adjustable from 1 to 250 kg (2 to 555 lb).
The body surface area, BSA, is calculated automatically by using du Bois formula. The
body surface area is used in calculating index values of some parameters.
Loading previous data
If the patient has already been admitted on the same monitor and this monitor has been
restarted, the Contin. Previous will be appeared.
Contin. Previous
Select this to load the most recent patient trends from the monitor memory when less than 15
minutes has elapsed from the turn-off. If the patient has been discharged but the monitor has
been on, you can retrieve approximately the last 24 hours.
NOTE: This selection is available if the patient is already admitted on this monitor.
Admit/
Discharge
To Next Page
Loading...
Need help?
General
