B30 Patient Monitor
5-6
Changing the user mode
The monitor always starts in startup mode. The startup mode is one of the user modes, and it is
chosen during configuration.
To change from the startup mode to another mode:
1. Press
Admit/Discharge and select Select Mode.
2. Select one of the following modes:
The selected mode is marked with a circle. You can return to the previous mode by selecting
Return to X.
During monitoring, you can make additional changes to the mode settings and, to make the
changes permanent, save them through the Save Modes menu.
STEP-DOWN Mode for intermediate care
ED Mode for emergency care
PACU Mode for post-anesthesia care
CCU Mode for ECG and ST care
NEURO Mode for neurological monitoring
PEDIATRIC Mode for pediatric ICU monitoring
Admit/
Discharge
To Next Page
Loading...
Need help?
General
