Airway gas (CO2)
17-9
Checklist
Check that:
• Water trap is locked into the module.
• Water trap container is empty.
• A new sampling line is used after each patient.
• Sampling line is connected to the water trap.
• Monitor is turned on and self-check is performed with the sampling line attached.
• Sampling line is connected to the airway adapter.
• The humidification and/or bacteria filter are in correct place.
• Breathing circuit or accessories have no residuals of alcohol based disinfectants.
• Desired gas parameter is selected for screen through Monitor Setup - Screen Setup.
To Next Page
Loading...
Need help?
General
