Chapter 1 Introduction
1 Object and Scope of this manual
This document is intended as a guide and information resource to properly plan and prepare a site
for the installation of an Innova system.
In addition, this document provides references to the pre–installation documents of the various
product included with an Innova System.
These documents are intended to assist the Installation Specialist and the Site Planner in properly
preparing a site for the installation of this system.
It provides pre–installation data, such as site preparation prior to the delivery of the Innova System,
environmental and electrical requirements and some additional planning aids.
MAKE SURE THE ROOM PREPARATION COMPLIES WITH LOCAL
REGULATIONS AS THE PIM IS NOT INTENDED TO REFLECT ALL OF THEM
Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare Direction 5160944-13-1EN, Revision 2
Chapter 1 Introduction 25
To Next Page
Loading...
Need help?
General
