GE LOGIQ V2 User Guide

System Start-Up
LOGIQ V2/LOGIQ V1 – User Guide 1-49
Direction 5610736-100 Rev. 9
Power Up Sequence
The system is initialized. During this time:
• The system boots up and the status is reflected on the
monitor.
• Probes are initialized for immediate operation.
NOTE: If no probe is connected, the system goes into freeze mode.
• Peripheral devices are activated on power up.
After initialization is complete, the default B-Mode screen is
displayed on the monitor (if a probe is connected).

GE LOGIQ V2 Specifications

General

Brand	GE
Model	LOGIQ V2
Category	Medical Equipment
Language	English