gefran ADV200 User Manual

168 ADV200 • Functions description and parameters list
1 Enable
Communication is disabled in the default conguration. Communication can be enabled by setting Enable and
saving the parameters. When the drive is re-started the EXP-FL-XCAN-ADV card, if installed, is recognised.
The communication is started and the external I/Os are managed. With the “External IO enable” set to Disable
the EXP-D6A4R1-ADV can be managed, if installed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
23.7.2 5482 External IO info UINT32 0 0 4294967295 ER FVS
This parameter displays the number of I/O resources read by the module.
It is a 32-bit parameter made up as follows:
Uint32
Uint16 High Uint16 Low
Uint8 High Uint8 Low Uint8 High Uint8 Low
N. of AO N. of AI N. of DO N. of DI
The parameter is displayed in HEX format.
E.g.:
PAR 5482 N. of AO N. of AI N. of DO N. of DI
0x02041020
33820704
0x02
2
0x04
4
0x10
16
0x20
32
0x00000810
2064
0x00
0
0x00
0
0x08
8
0x10
16
If the conguration that is read has changed (compared to the last conguration saved or read) the drive dis-
plays and message requires the intervention of the operator in order to proceed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
23.7.3 5484 External IO state BIT 16 0 0 1 ER FVS
This parameter displays the communication state
0 Off
1 On
This parameter is set to 1 (on) if the communication state is operational.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
23.7.4 5486 External IO failcode UINT32 0 0 4294967295 ER FVS
If an “Ext I/O fault” occurs due to the Emergency slave subcode 255..65535 alarm message, this parameter
displays 4 of the 5 InfoBytes of the “Emergency” message.
See the slave manual for information about the meaning of the InfoBytes in the Emergency message (CAN
slave communication module).
See Chapter C - “ExtIO fault alarm”.
23.8 - COMMUNICATION/FAST LINK
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
23.8.1 5702 FL address UINT16 0 0 16 ERWZ FVS
This parameter is used to enable the FastLink function and select whether the drive is to be the master or
slave. If used as a slave device, the address can be selected.
0 = Disabled
1 = Master
2 = Slave 1
X = Slave X-1
16 = Slave 16

gefran ADV200 Specifications

General

Brand	gefran
Model	ADV200
Category	Inverter
Language	English