Honda XR125L User Manual

−
−
Whenever you check the tyre pressures,
youshouldalsoexaminethetyretreadsand
sidewalls for wear, damage, and foreign
objects:
Look for:
Bumps or bulges in the side of the tyre or
thetread.Replacethetyreifyoufindany
bumps or bulges.
Cuts, splits or cracks in the tyre. Replace
the tyre if you can see fabric or cord.
Excessive tread wear.
Also, if you hit a pothole or hard object, pull
to the side of the road as soon as you can
safely and carefully inspect the tyres for
damage.
Always check air pressure when your tyres
are ‘‘cold.’’ If you check air pressure when
your tyres are ‘‘warm’’ even if your
motorcycle has only been ridden for a few
miles the readings will be higher. If you
let air out of warm tyres to match the
recommended cold pressures, the tyres will
be underinflated.
The recommended ‘‘cold’’ tyre pressures
are:
Front
Rear
Front
Rear
Driver
only
Driver and
one passenger
kPa (kgf/cm , psi)
Inspection
26
150 (1.5 , 22)
150 (1.5 , 22)
150 (1.5 , 22)
200 (2.0 , 29)
10/03/11 17:08:58 32KRHA00_036

Honda XR125L Specifications

General

Compression Ratio	9.2:1
Transmission	5-speed
Fuel System	Carburetor
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	Drum
Front Tire	90/90-19
Rear Tire	110/90-17
Ignition	CDI
Final Drive	Chain
Engine Type	Air-cooled 4-stroke single-cylinder OHC
Bore x Stroke	56.5 mm x 49.5 mm
Rear Suspension	Swingarm with single shock
Fuel Capacity	12 L
Max. Torque	10.4 Nm @ 6, 500 rpm