EasyManuals Logo

Honda XR125L User Manual

Honda XR125L
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Perform the Pre-ride Inspection (page ) at each scheduled maintenance period.
I: INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY
C: CLEAN R: REPLACE A: ADJUST L: LUBRICATE
The following Maintenance Schedule specifies all maintenance required to keep your motorcycle in peak operating
condition. Maintenance work should be performed in accordance with standards and specifications of Honda by
properly trained and equipped technicians. Your Honda dealer meets all of these requirements.
Should be serviced by your Honda dealer, unless the owner has proper tools and service data and is mechanically
qualified. Refer to the Official Honda Shop Manual.
In the interest of safety, we recommend these items be serviced only by your Honda dealer.
Honda recommends that your Honda dealer should road test your motorcycle after each periodic maintenance is
carried out.
Replace every 2 years. Replacement requires mechanical skill.
At higher odometer readings, repeat at the frequency interval established here.
Service more frequently when ridden in wet or dusty conditions.
Service more frequently when riding OFF-ROAD.
NOTE: (1)
(2)
(3)
(4)
39
MAINTENANCE SCHEDULE
54
10/03/11 17:11:38 32KRHA00_064

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda XR125L and is the answer not in the manual?

Honda XR125L Specifications

General IconGeneral
Compression Ratio9.2:1
Transmission5-speed
Fuel SystemCarburetor
Front SuspensionTelescopic fork
Front BrakeSingle disc
Rear BrakeDrum
Front Tire90/90-19
Rear Tire110/90-17
IgnitionCDI
Final DriveChain
Engine TypeAir-cooled 4-stroke single-cylinder OHC
Bore x Stroke56.5 mm x 49.5 mm
Rear SuspensionSwingarm with single shock
Fuel Capacity12 L
Max. Torque10.4 Nm @ 6, 500 rpm

Related product manuals